| ACIDROD.COM |
| The online home of C & M Custom Tackle |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Lathes & Accessories |
The Turncrafter Pro offers plenty of
power, is built to last, made of HD
cast iron and comes complete with
many no-cost extras such as a 3"
faceplate, live & spur centers.
Get yourself a 4-jaw chuck and
tailstock chuck and you'll be ready
to turn just about anything. Movable
speed control box let's you
locate it anywhere up to 2ft away on
your workbench - very handy.
power, is built to last, made of HD
cast iron and comes complete with
many no-cost extras such as a 3"
faceplate, live & spur centers.
Get yourself a 4-jaw chuck and
tailstock chuck and you'll be ready
to turn just about anything. Movable
speed control box let's you
locate it anywhere up to 2ft away on
your workbench - very handy.
PSI 4'', 4 Jaw Scrolling Chuck
Self centering. Includes Four sets of jaws for a large
range of material sizes from Pen Blanks to Bowls.
Capacity: Inside - 0" - 2-7/8"
Outside - 1-1/2" - 3-7/8"
1'' x 8 Tpi mounting threads, with 3/4" X 16TPI adapter.
Self centering. Includes Four sets of jaws for a large
range of material sizes from Pen Blanks to Bowls.
Capacity: Inside - 0" - 2-7/8"
Outside - 1-1/2" - 3-7/8"
1'' x 8 Tpi mounting threads, with 3/4" X 16TPI adapter.
- Motor 1/2 HP, 120V AC, 8A.
- Variable speed 650 to 3800 RPM. Three stages: 650-
1430 RPM, 1240-2790 RPM, 1600-3800 RPM. - Distance between centers 18''. Optional extension
increases bed size to 39" between centers. - Swing over bed 10''.
- Head stock spindle thread 1'' x 8tpi.
- Hollow head stock #2 Morse Taper, Hollow tail stock
#2 Morse Taper. - 4" Tailstock travel for boring spindles with the optional
tail stock chuck. - Overall Size 30''L x 7-1/4'' W x 14-1/2''H.
- Net weight (lathe only) 71 lbs.
- Features / Benefits:
- Heavy duty cast iron construction. Precision
components. Electronic speed adjustment for infinite /
instant control. Provides full torque at all speeds (3 belt
positions). Removable control box can be mounted up
to 2 feet from lathe. - Includes 6'' Tool rest, 3'' Face plate, MT#2 Spur
Center, MT#2 Live Tailstock Center, Knock Out Bar
1/2'' Tailstock Chuck
Three Jaw Chuck used for boring
Includes MT#2 Tailstock Shaft & Chuck Key
Three Jaw Chuck used for boring
Includes MT#2 Tailstock Shaft & Chuck Key
| PSI Turncrafter Pro Wood Lathes |
| 18" Between Centers Shown with standard equipment including 60 degree live center, spur center, face plate and 6" tool rest |
| Grip Turning Mandrels Below |
Well folks, it's a case of "if you can't beat 'em, join 'em"! We've searched and searched for quality tools to offer
our customers, but when it comes to heavy machines like lathes, shipping cost soon becomes a deal breaker.
Asking manufacturers the question, "how can Amazon offer machines for that price AND pay the freight?", the
answer we often got was "I have no idea..."
Rather than beat our heads against the wall any longer, we've decided to simply do our customers a favor and
point them to the best deals we could find on the internet for these freight intense machines.
our customers, but when it comes to heavy machines like lathes, shipping cost soon becomes a deal breaker.
Asking manufacturers the question, "how can Amazon offer machines for that price AND pay the freight?", the
answer we often got was "I have no idea..."
Rather than beat our heads against the wall any longer, we've decided to simply do our customers a favor and
point them to the best deals we could find on the internet for these freight intense machines.
| All Lathe prices below INCLUDE U.S. SHIPPING COSTS! |
| You might also like.... |
5-speed 500 to 3200 RPM
Variable Speed 650-3800 RPM
| Shown with optional Four Jaw Scroll Chuck and threaded mandrel. |
Click Photo To Enlarge
| From a block of wood to an exotic reel seat insert in four easy steps... |
1. Optional Four Jaw Headstock
Chuck and Three Jaw Tailstock
Chucks allow you to easily bore
perfectly centered holes in reel
seat blanks.
Chuck and Three Jaw Tailstock
Chucks allow you to easily bore
perfectly centered holes in reel
seat blanks.
2. With the reel seat blank
spinning in the headstock chuck
and the brad point bit fixed in the
tailstock chuck, the drill chuck is
fed into the work piece using the
hand wheel at the rear of the
tailstock. Tail stock "quill" travels
up to 4".
spinning in the headstock chuck
and the brad point bit fixed in the
tailstock chuck, the drill chuck is
fed into the work piece using the
hand wheel at the rear of the
tailstock. Tail stock "quill" travels
up to 4".
3. After replacing the tailstock
chuck with the 60 degree live
center, the drilled reel seat blank
is then fastened to a threaded
wood turning mandrel and turned
from it's square shape into a
cylinder.
chuck with the 60 degree live
center, the drilled reel seat blank
is then fastened to a threaded
wood turning mandrel and turned
from it's square shape into a
cylinder.
1. The reel seat insert is turned to
it's finished size, then the rear
mortise is cut to accept the reel
seat hardware. The seat is then
sanded while spinning with 220G,
then 500G sandpaper prior to
finishing.
it's finished size, then the rear
mortise is cut to accept the reel
seat hardware. The seat is then
sanded while spinning with 220G,
then 500G sandpaper prior to
finishing.
"Through Bore" hollow headstock shaft allows
1/4", 5/16" and 3/8" mandrels to pass through for
added mandrel support, providing reduced
chatter or vibration on small diameter mandrels.
1/4", 5/16" and 3/8" mandrels to pass through for
added mandrel support, providing reduced
chatter or vibration on small diameter mandrels.
Custom grips are built on grip turning mandrels by simply applying
paraffin wax to the mandrel, then slipping on cork rings, wood trim
rings,etc..., gluing them together and clamping until dry. The
assembly can them be moved to the lathe to be shaped, sanded
and even finished before removing them from the mandrel and
installing on your rod blank.
paraffin wax to the mandrel, then slipping on cork rings, wood trim
rings,etc..., gluing them together and clamping until dry. The
assembly can them be moved to the lathe to be shaped, sanded
and even finished before removing them from the mandrel and
installing on your rod blank.
| Click Photos To Enlarge |
| Click Photos To Enlarge |
| 18" Hardened Tool Steel Grip Turning Mandrels |
|
|
Chamfered edges won't dig into cork rings. 60 degree
center bored in both ends for use in standard lathe live
centers. Easily glue up handle assemblies off the rod
by simply rubbing the mandrel with paraffin wax prior to
gluing and clamping the cork rings.
center bored in both ends for use in standard lathe live
centers. Easily glue up handle assemblies off the rod
by simply rubbing the mandrel with paraffin wax prior to
gluing and clamping the cork rings.
|
| 18" Hardened Tool Steel Threaded Wood Turning Mandrels |
A must have for those turning their own reel seat
inserts, wood handles, etc... Material is placed on the
mandrel between the two bronze bushings, the stop
collar is tightened in place and the lock nut then
tightened to secure the work on the mandrel for turning.
Threaded one end with 60 degree center bore in both
ends for use in standard lathe live centers. Includes
lock nut, stop collar, two bronze bushings and hex key.
inserts, wood handles, etc... Material is placed on the
mandrel between the two bronze bushings, the stop
collar is tightened in place and the lock nut then
tightened to secure the work on the mandrel for turning.
Threaded one end with 60 degree center bore in both
ends for use in standard lathe live centers. Includes
lock nut, stop collar, two bronze bushings and hex key.
The first DVD to address the function of the Wood Lathe
for use in rod building. Everything you need to know to
get started making your own Grips & Reel Seats
for use in rod building. Everything you need to know to
get started making your own Grips & Reel Seats
| DVD FORMAT $24.99 |
"The Wood Lathe in Rod Building" DVD
| Good Starter Chisel Sets |
| Lathe Basics Books |
| PSI Bed Extension |