

| Turkshead Knots, Butt Cord, Tuna Cord |
| ACIDROD.COM |
| The online home of C & M Custom Tackle |
| Polyester Butt Cord |
| Aprox 3/32" Diameter X 300' Spools. Used on "Deckhand" style rods in place of cork tape. Also used for "Rail Rods" by wrapping a 6"-8" section of the blank between the reel seat and the foregrip, allowing the rod to be placed on the boat rail while fighting large fish, preventing damage to the foregrip. Also used to wrap Plier handles, Knife handles, etc... Does not need epoxy or varnish coating to prevent mildew. |
| Tired of trying to tie your own Turksheads? Now you can finish off your Rod or Gaff with a classic Turkshead Knot that's pre-tied and ready to slip on and cinch down! |
| Stocked in Classic Black and available in Polyester or traditional Tarred Seiners Line. Tied to an inside diameter of 1-3/8", these Knots can easily slide over the back of most rods into position and then tightened snuggly using the enclosed, easy to follow photo instructions. Larger diameters are available as a special order. |
| Custom Colors also available! Any color of Poly Cord available in our store can be custom tied to order. Scroll down to see available Poly Cord colors. There is an additional charge of $5 for custom colors added to the prices shown for Black Knots below. Orders for multiple knots of the same pattern and color will be charged an extra $5 for the first knot, then additional knots of the same color and pattern on the same order will be priced the same as the Black knots shown below. Two color combos (shown at right) are also available and priced the same as a single color Custom Knot. You must allow an additional 10-14 days for delivery on custom orders. |
| The Anatomy of a Turkshead Knot Turkshead patterns are called out by two dimensions. "Bights" and "Leads". "Bights" are the bands that go around the cylinder making up it's circumference. Smaller diameter rods, pliers, etc... Generally work better with knots with a lower number of bights. "Leads" are the number of "columns" of cord that make up the overall length of the cylinder. An "8 lead" knot is twice the length (front to back) as a "4 lead" knot. A "12 lead" knot is three times the length of a "4 lead" knot, etc... |
| 5X4 3/4" Length $7.49 |
| 7X4 3/4" Length $7.99 |

| Twisted Nylon Seine Line - Tarred "Traditional" Tuna Cord for Rod and Gaff Grips |
|
| 5x6 1" Length $9.99 |
| 7x6 1" Length $11.99 |
|
|
|
|
|
| 5x8 1-3/8" Length $14.99 |
| 7x8 1-3/8" Length $15.99 |
| 7x10 1-5/8" Length $19.99 |
| 7x12 1-7/8" Length $27.99 |
|
|
| Reel Clamps for Deckhand Grips CLICK HERE |
| ||||||||||||
| 5x6 4 Strand 1" Length The same knot used by Seeker & Aftco! #36 Seine $9.99 |