|The online home of
C & M Custom Tackle
|Reel Seat & Slick Butt Arbors
|Glued in place with epoxy, these lightweight arbors create a super strong
bond between the reel seat and the rod blank, increasing sensitivity. The
arbor is a solid, semi porous polyurethane material that is easily workable.
O.D. can be lathe turned. The 1/4" inside diameter pilot hole can be easily
reamed or drilled out to fit any size blank. Try a Flex Coat self-piloting drill bit
(below) for a PERFECTLY centered hold! This is a FAR SUPERIOR method
to mounting reel seats than "tape rings" and is usually MUCH faster!
Sold in packs of three
|Self-aligning 1/4" pilot for perfectly centered
bores in Brick Foam Arbors
|New larger roll! Far superior to masking tape
bushings for mounting reel seats. This mesh
tape allows the epoxy to go all the way through
the bushing, from the seat to the blank for a
fail safe bond. "Builds up" twice as fast as
masking tape with a thickness of .008" versus
most masking tapes at .003"-.004" 2" X 300'
roll. We cut this into 1/2" - 3/4" strips, (or
simply cut in half) then wrap it into bushings
1/4" apart under the length of the reel seat.
Self Adhesive !!